View previous topic :: View next topic |
Author |
Message |
ronharpervoice Club 300

Joined: 23 Jan 2007 Posts: 347 Location: Ohio
|
Posted: Tue Jun 25, 2019 9:08 am Post subject: |
|
|
I love my DT 770s. Yes, they are very comfortable. I don't get into to many sonic arguments, since I'm sure that 30 years of radio left its mark on my hearing.
When I started in the biz, I was using the Radio Shack Duophones. Remember those - stethoscope like. Later graduated to the Koss Pro 4AA (free lifetime repairs!!) and then Koss changed something, and they weren't like before. _________________ "When I was your age, we had to dial to get online"
===============
www.ronharper.com
www.ronharper.com/blog
www.videosonyourwebsite.com |
|
Back to top |
|
 |
Quicksilver Been Here Awhile

Joined: 29 Oct 2012 Posts: 217
|
Posted: Fri Jul 26, 2019 12:32 pm Post subject: |
|
|
I've found the Sony's are the most comfortable for directed sessions or short use but they fried my ears when I use to wear them all day, that high end get's really harsh after a while. Sony's also fold up nicely for travel cans.
The 770s didn't have that problem nearly as bad.
That said, I'm almost 100% just on studio monitors, these days, if it's not a directed session. |
|
Back to top |
|
 |
JohnV Been Here Awhile

Joined: 25 Feb 2016 Posts: 233 Location: Md/DC
|
Posted: Sat Jul 27, 2019 6:18 pm Post subject: |
|
|
oh my... I hadn;t EVER thought of My Headphone Timeline...
first were some classic bakelite hockypucks that came with a Hallicrafters ham receiver...
Then the KOS KO-727's ( small radio speakers in a nice cup... I had ARRIVED!)
After that came the 80's YAMAHA headphones which were the most neutral thing I;d heard... I'd found there was a Better PLace...
Along came the SHURE 7506 which, like the YAMAHA NS-10 monitor speaker, is a long way from ACCURATE or NATURAL or even PLEASANT but bombproof and you tend not to make mistakes with them... have several.
Then I was working with a classical recordist and he had (WARNING: We Are Approaching Lamborghini-Strata... take your seats) STAX LAMBDA-PROs.
In 1980 dollars these were $1500 worth of large open kinda-not-square cages on either side of your head that sounded like NOTHING... just a magical transport of your hearing to Somewhere ELse... somewhere sonic that was more-real than what you had heard before you put them on. I bought a pair of STAX SR-34's for like 1/10 of that cost.
The I got a deal on BEYER DT990's... as mentioned here they are large COMFY open-air headphones (NOT for booth work) but for anything else WONDERFUL and at least in the ballpark of teh high end STAX
. The Beyer DT770 is a closed-back version and almost as nice... again SUPER comfy for long use. Sennheiser makes similar... _________________ SoundscenesDC, main talent and production offices just 385k km up the gravity well in LuNoHoCo Center, old satellite studios still bookable at the future site of Johnson City! |
|
Back to top |
|
 |
RexAnderson

Joined: 09 Dec 2019 Posts: 2 Location: Baltimore, MD
|
Posted: Mon Dec 09, 2019 8:43 pm Post subject: |
|
|
I have both the 7506's and the DT770's. After the second time my 7506's shorted out on the right side (an engineer at a studio I work with was kind enough to give me one of their half-dead pair to cannablize for parts for the first repair), I sprung for the DT770s. Absolutely destroys the 7506 in terms of balance, depth, and comfort. The 7506's are a little more in your face, which made them great for editing out even the tiniest of mistakes, but the DT770's just shine on everything. I love listening back on them, I can wear them all day, and best of all they don't die on me constantly. They're absolutely worth the extra ~$120ish bucks. |
|
Back to top |
|
 |
George Been Here Awhile

Joined: 09 Dec 2019 Posts: 283 Location: Seattle, WA
|
Posted: Fri Jan 03, 2020 10:26 am Post subject: |
|
|
dredging up an old post to ask a question about the DT770s:
has anyone found a specific difference between 80ohm and 250ohm models? or is everyone using the 32ohm version and i'm asking the wrong question?
in reading a few online reviews (ymmv) the theme i'm finding is that the 80ohm models are great for fun listening, the 250ohm model for critical listening. any thoughts on that? |
|
Back to top |
|
 |
Eddie Eagle M&M
Joined: 23 Apr 2008 Posts: 2393
|
Posted: Fri Jan 03, 2020 12:38 pm Post subject: |
|
|
I typically have stayed away from headphones and have just used monitors in my studio until now. My lovely wife bought me a pair of Sennheiser Momentum 3 headphones and it rekindled my love of listening to music privately. So me being me, I checked out how they performed on my recording setup and they are stellar. I wouldn't have thought to buy a set just for myself but sure am glad my wife dove right in. They are pricey but the sound is music studio quality and gives me a renewed sense of how good technology and home studios can be today.
My current setup is a Langevin CR3A mic (Same capsule as the Manley Reference Mic but with different circuitry.)
Neve Portico 5032 Pre/EQ
Focusrite Forte A/D converter/Soundcard
Custom 3.2ghz PC based workstation |
|
Back to top |
|
 |
Jack Daniel Cinquecento

Joined: 23 Jun 2016 Posts: 581 Location: SoCal
|
Posted: Sat Jan 04, 2020 9:34 am Post subject: |
|
|
George wrote: |
has anyone found a specific difference between 80ohm and 250ohm models? or is everyone using the 32ohm version and i'm asking the wrong question?
|
Most people (myself included) use the 80 ohm model. It's just fine for what we do and does not require particularly high power to drive. The 250 ohm model does require a lot of power to drive the cans--the headphone outputs of many interfaces may lack sufficient power. Although the 250s are considered more detailed, it's overkill for voice recordings. But some folks seem to love them.
The 80s are really excellent--and the sound is as close to unbiased as it gets. _________________ Jack Daniel
Narrator / Man About Town |
|
Back to top |
|
 |
George Been Here Awhile

Joined: 09 Dec 2019 Posts: 283 Location: Seattle, WA
|
Posted: Sat Jan 04, 2020 9:48 pm Post subject: |
|
|
Jack Daniel wrote: | George wrote: |
has anyone found a specific difference between 80ohm and 250ohm models? or is everyone using the 32ohm version and i'm asking the wrong question?
|
Most people (myself included) use the 80 ohm model. It's just fine for what we do and does not require particularly high power to drive. The 250 ohm model does require a lot of power to drive the cans--the headphone outputs of many interfaces may lack sufficient power. Although the 250s are considered more detailed, it's overkill for voice recordings. But some folks seem to love them.
The 80s are really excellent--and the sound is as close to unbiased as it gets. |
fantastic feedback. I really appreciate the insight.
in a bizarre twist and through a local connection, I ended up acquiring a pair of 250ohm in trade for some other equipment that I was no longer using and have not yet needed to get an amplifier out of the closet. the two audio interfaces I've tried it with so far (Steinberg CI2 and UR-RT2) are capable of driving them quite sufficiently and I completely agree: the sound is stunning. I can't hear any bleed when tracking and they are sooooooooooo comfortable. wonderful addition to the family. (: |
|
Back to top |
|
 |
JohnV Been Here Awhile

Joined: 25 Feb 2016 Posts: 233 Location: Md/DC
|
Posted: Sun Jan 05, 2020 9:23 am Post subject: |
|
|
AGREE with George on the 250-vs-80 versions of the beyers... I have both and the difference is infinitesimal...
what IS important is that you can get the volume you need... I drive the 250's direct off a Crown 60w amp... normal headphones would explode. (as would the 80 ohm Beyer) but the lo impedance ones are loud on anything like usual mixer and interface headphone jacks.
as to 990's vs Sen 600's (open back transparency) try em both.
as to the closed 770's no question ever! _________________ SoundscenesDC, main talent and production offices just 385k km up the gravity well in LuNoHoCo Center, old satellite studios still bookable at the future site of Johnson City! |
|
Back to top |
|
 |
Philip Banks Je Ne Sais Quoi

Joined: 20 Jun 2005 Posts: 11067 Location: Portgordon, Scotland
|
Posted: Sun Jan 05, 2020 9:28 am Post subject: |
|
|
No headphones here. I leave my speakers on and mute the mic when recording. Benefits are twofold, 1 - It saves time editing and of course 2. |
|
Back to top |
|
 |
todd ellis A Zillion

Joined: 02 Jan 2007 Posts: 10523 Location: little egypt
|
Posted: Sun Jan 05, 2020 12:57 pm Post subject: |
|
|
i haven't worn cans in years - but i'd like to nominate this thread as the (so far) longest continuously-running thread on the vo-bb --- 6 months & counting! _________________ "i know philip banks": todd ellis
who's/on/1st?
 |
|
Back to top |
|
 |
George Been Here Awhile

Joined: 09 Dec 2019 Posts: 283 Location: Seattle, WA
|
Posted: Sun Jan 05, 2020 10:40 pm Post subject: |
|
|
I had to do a double take when reading Philp's response before I realized the context. forums are fun.
I thought I should specify something. the headphones came with two sets of pads: the ones that are presently installed are some kind of memory foam. the other ones (silver in color, I believe he told me they're the originals) are soft and bounce back quickly to their original shape. I traded them out and found that the originals had a surprising amount of bleed into the mic when recording at a safe distance away. the memory foam ones had no such leak. very interesting.
I only noticed the leak because the project I was working on was an overdub and I could hear the original language as a bit of bleed when listening back for edits. anyone else run into this? |
|
Back to top |
|
 |
Eddie Eagle M&M
Joined: 23 Apr 2008 Posts: 2393
|
Posted: Mon Jan 06, 2020 7:25 am Post subject: |
|
|
George wrote: | I had to do a double take when reading Philp's response before I realized the context. forums are fun.
|
(in my best Peter Griffin) Therrre ya go. |
|
Back to top |
|
 |
Bruce Boardmeister

Joined: 06 Jun 2005 Posts: 7973 Location: Portland, OR
|
Posted: Mon Jan 06, 2020 5:07 pm Post subject: |
|
|
I've been more or less happy with my Sony 7506 headphones but they do wear on my outer ears in long edit sessions (I am part elf you know). So hunting for the Beyerdynamic DT 770 80 ohm, I found a good deal today at HHGregg and because I did it through their relationship with Google shopping I got $20 off an already good price and free shipping. Total $119.
B _________________ VO-BB Member #31 Enlisted June, 2005
I'm not a Zoo, but over the years I've played one on radio/TV. . |
|
Back to top |
|
 |
George Been Here Awhile

Joined: 09 Dec 2019 Posts: 283 Location: Seattle, WA
|
Posted: Mon Jan 06, 2020 8:36 pm Post subject: |
|
|
Bruce wrote: | I've been more or less happy with my Sony 7506 headphones but they do wear on my outer ears in long edit sessions (I am part elf you know). So hunting for the Beyerdynamic DT 770 80 ohm, I found a good deal today at HHGregg and because I did it through their relationship with Google shopping I got $20 off an already good price and free shipping. Total $119.
B |
excellent deal! i'm very much looking forward to hearing your thoughts on how they sound to you. |
|
Back to top |
|
 |
|