VO-BB - 20 YEARS OLD!

Deirdre · Posted: Tue Apr 28, 2015 8:42 am Post subject: Apogee Duet What-the-hecks

If I have my Apogee Duet plugged in when my Mac starts up, I have to unplug it and re-plug it for the dial to work properly. It will act fine as a converter and I can record, no problem— but I can't push the button to show the different channels and change their level. It just shows the record channel.
Also— if I use a TRS jumper out of the headphone jack to my board, it's -10dB no matter how I set the output in the controls, and if I use a TS jumper, the feed has a ground hum.
What the hell! Am I off base with something?
_________________
DBCooperVO.com
IMDB

Frank F · Posted: Tue Apr 28, 2015 9:13 am Post subject:

I have a friend with the same issue(s) and a few more. Apogee is of no help. Try rebooting it again and again until you find it works.

Also replace your USB cable with a new shielded one. After the cable fix, my friend's Apogee Duet is working better.

Frank F
_________________
Be thankful for the bad things in life. They opened your eyes to the good things you weren't paying attention to before. email: thevoice@usa.com

Simon Phillips · Posted: Tue Apr 28, 2015 9:23 am Post subject:

Just in case you haven't already tried it... have you checked the software (it's Maestro with my Duet) for a preference or setting that may be overriding what you're doing manually?

I've been lucky with my one, but it's a lot better since I got a breakout box for the cables.

Deirdre · Posted: Tue Apr 28, 2015 8:45 pm Post subject:

+1 for the new cable idea, Frank! it is the first thing I will try next time I start my setup.
And Simon— I was on the prowl for just that (a software override) today. We shall see how things settle out.and I will get myself the breakout box. Those damned cables are a pain in my neck.
_________________
DBCooperVO.com
IMDB