VO-BB - 19 YEARS OLD! Forum Index VO-BB - 19 YEARS OLD!
Established November 10, 2004
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Tone Wood
Goto page 1, 2  Next
 
Post new topic   Reply to topic    VO-BB - 19 YEARS OLD! Forum Index -> Gear !
View previous topic :: View next topic  
Author Message
vkuehn
DC


Joined: 24 Apr 2013
Posts: 688
Location: Vernon now calls Wisconsin home

PostPosted: Thu Apr 14, 2016 5:58 pm    Post subject: Tone Wood Reply with quote

I budget a small amount of time for just chasing interesting looking You-Tube episodes. "How I built my Studio" show-and-tell will capture my attention everytime.

Watched a guy in Europe show how he built his studio. He did all the traditional, accepted and right things. But toward the end of the 3rd episode as he began to flesh-out the decor I muttered "Say What?" or some slightly less socially acceptable. He had a lot of wall space covered by sound absorbing materials and then he began laying something over the center of each wall. Strips of wood. Some pieces of wood that looked like they wanted to be diffusors when they grow up. And then he began waxing poetic about the "tone wood" he was using.

He probably does more music recording and editing than he does v-o recording. So maybe he simply wanted a decor that would impress his music friends. But he had a number of wood "slats" maybe 6 inches wide, 3 to 4 feet long, and lined up side by side with gaps between the slats like a shadow box privacy fence around your patio.

Now I've read how many of the older (classical music) concert halls in this country are patterned after the great European concert and opera houses with a lot of wood panels for acoustic enhancement. If it was good enough for stradivarious to use to make great violins, why not a great listening hall?

Has anyone ever incorporated "resonating wood" slats or panels in a studio?
Back to top
View user's profile Send private message Send e-mail
Frank F
Fat, Old, and Sassy


Joined: 10 Nov 2004
Posts: 4421
Location: Park City, Utah

PostPosted: Thu Apr 14, 2016 10:14 pm    Post subject: Reply with quote

Yes, and wood is great IF you know how to use it.

I will dig out some old pictures and show how wood and acoustic stones/rock a mesh well in a studio.

Frank F
_________________
Be thankful for the bad things in life. They opened your eyes to the good things you weren't paying attention to before. email: thevoice@usa.com
Back to top
View user's profile Send private message Yahoo Messenger MSN Messenger
DenaliDave
Club 300


Joined: 09 Jan 2016
Posts: 307
Location: Anchorage, Alaska

PostPosted: Thu Apr 14, 2016 11:01 pm    Post subject: Reply with quote

Well they make violins and acoustic guitars out of certain woods for their tonal qualities....

I would imagine it might add warmth or wooliness to a room.
_________________
"The wise ones fashioned speech with their thought, sifting it as grain is sifted through a sieve." - Buddha
www.alaskamic.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
sdaeley17
Club 300


Joined: 04 Sep 2013
Posts: 338
Location: Port Orchard, WA

PostPosted: Fri Apr 15, 2016 5:22 am    Post subject: Reply with quote

Promo Pro Beau Weaver has a perfect (and beautiful) example of using wood and stone in his booth, which you can see here.

https://www.youtube.com/watch?v=a3Vf2-ZUDoY
_________________
"There's Magic all around us; you just have to see it. And the most wonderful Magic of all, is just bein' alive." -Uncle Montork, He-Man and the Masters of the Universe
Back to top
View user's profile Send private message Send e-mail
vkuehn
DC


Joined: 24 Apr 2013
Posts: 688
Location: Vernon now calls Wisconsin home

PostPosted: Fri Apr 15, 2016 6:26 am    Post subject: Reply with quote

sdaeley17 wrote:
Promo Pro Beau Weaver has a perfect (and beautiful) example of using wood and stone in his booth


Thank you, Sean. I had seen this Beau Weaver video before and I was overwhelmed with the detail. (I sent a link to the video to a non-VO friend of mine who, as I knew he would, just went bonkers over "Beau's hippie hair-do".)

This time through, I was watching for little detail. So often in a booth, the table, the desk-top is attached to the walls. When you look over the top of the desk (in the booth) there looks like there may be 24 inches or so of open space between the back of the desk and the wall. To me one of the acoustic nightmares of "a booth too small" is that we create little proximity-effect nightmares with table tops that reach to the wall on each side, and the wall behind.
Back to top
View user's profile Send private message Send e-mail
Mike Harrison
M&M


Joined: 03 Nov 2007
Posts: 2029
Location: Equidistant from New York City and Philadelphia, along the NJ Shore

PostPosted: Fri Apr 15, 2016 6:34 am    Post subject: Reply with quote

My high school's auditorium walls featured wood paneling interspersed with acoustical insulation. It sounded great in there.
_________________
Mike
Male Voice Over Talent
I have taken leave of my sensors.

Back to top
View user's profile Send private message Send e-mail Visit poster's website
Jason Huggins
The Gates of Troy


Joined: 12 Aug 2011
Posts: 1846
Location: In the souls of a million jeans

PostPosted: Fri Apr 15, 2016 7:18 am    Post subject: Reply with quote

Use Maple if you want a tight focused bright fundamental tone, Mahogany if you want a warm and woody mid range focused tone with slightly dipped high and lows, East Indian Rosewood if you want a luscious deep complex tone with heavy harmonic content (Brazilian Rosewood will reward you with greater depth and complexity but is very expensive because the species is now protected due to over harvesting in the past), Koa if you want a bright but still woody tone with a depth that develops with age and if you want something really special try Cocobolo. It will give you solid and complex bass frequencies a slightly scooped midrange but shimmering crystalline highs when paired with powerful Adirondack Spruce or balanced Sitka Spruce.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Monk
King's Row


Joined: 16 Dec 2008
Posts: 1152
Location: Nestled in the Taconic Hills

PostPosted: Fri Apr 15, 2016 7:31 am    Post subject: Reply with quote

Jason,

Ya made my morning.

Don't forget balsa wood for a light airy sound and for a room that needs a solid lumberjack sound, nothing beats the mighty scotch pine.
_________________
Company, villainous company, hath been the spoil of me...

www.monksvoice.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Lee Gordon
A Zillion


Joined: 25 Jul 2008
Posts: 6855
Location: West Hartford, CT

PostPosted: Fri Apr 15, 2016 8:56 am    Post subject: Reply with quote

Good thing Trish Basanyi isn't a regular here, or she's be lining her booth with purpleheart. And do you need to add extra bass traps if you use basswood? Shocked
_________________
Lee Gordon, O.A.V.
Voice President of the United States
www.leegordonproductions.com
Twitter: @LeeGordonVoice
Back to top
View user's profile Send private message Visit poster's website
Rob Ellis
M&M


Joined: 01 Aug 2006
Posts: 2385
Location: Detroit

PostPosted: Fri Apr 15, 2016 9:14 am    Post subject: Reply with quote

Quote:
East Indian Rosewood if you want a luscious deep complex tone with heavy harmonic content (Brazilian Rosewood will reward you with greater depth and complexity but is very expensive because the species is now protected due to over harvesting in the past), Koa if you want a bright but still woody tone with a depth that develops with age and if you want something really special try Cocobolo.


So much for buying some 2X4s from Lowes and putting them in my booth cool
Back to top
View user's profile Send private message Send e-mail Visit poster's website
vkuehn
DC


Joined: 24 Apr 2013
Posts: 688
Location: Vernon now calls Wisconsin home

PostPosted: Fri Apr 15, 2016 9:28 am    Post subject: Reply with quote

Elwood wrote:
So much for buying some 2X4s from Lowes and putting them in my booth


Oh, the guy in the video included something that looked like the 2x4s from Lowes but they didn't count at "tone wood".... they were the token "diffusors".

It's a real bummer that he didn't give a ratio for how many square feet of diffusors vs. square feet of tone wood.
Back to top
View user's profile Send private message Send e-mail
DenaliDave
Club 300


Joined: 09 Jan 2016
Posts: 307
Location: Anchorage, Alaska

PostPosted: Fri Apr 15, 2016 10:33 am    Post subject: Reply with quote

A combination of woods in the correct ratios could really add a "shine" to a room's acoustics.

Based on what's been said here already about the tonal qualities of specific wood -- using those woods in the right spots, in the right shapes, and in right amounts would be awesome.

I bet it is a finely dialed in science, and very space-dependent. No two areas are the same, and even an expert would probably have to listen to the room's natural acoustic signature for a while and experiment to get it dialed in.

I would imagine the smaller the space, the less wiggle room you have. Tolerances would be higher as to placement, quantity, and wood type. With less air to move and less surface area for it to hit, you'd want to make sure every sliver of wood had a purpose.
_________________
"The wise ones fashioned speech with their thought, sifting it as grain is sifted through a sieve." - Buddha
www.alaskamic.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Bruce
Boardmeister


Joined: 06 Jun 2005
Posts: 7964
Location: Portland, OR

PostPosted: Fri Apr 15, 2016 11:12 am    Post subject: Reply with quote

Two things... I used to record in a studio in Phoenix that was 60% wood surfaces... floor and much of the walls, and 20% windows. The rest was acoustical panels. Whatever he did it sounded just like the best padded cells, er booths, I've worked in.

Other thing from watching the Beau Weaver video: I have a new CAD100 mic and I'm getting lots of low rumbling noise that shows up on my VU meters but is almost inaudible. I'm sure it's a combination of the very short and tight o-rings they use in their shock mount not absorbing much vibration PLUS the flexible mic boom that I use that is attached to my desk. It wobbles every so slightly every time I touch the desk as in rolling the mouse wheel to advance copy on the screen. Beau appears to have wrapped some heavy cloth or such around one of his flexible booms and strapped it tight. I'll give it a try and see if that helps.

B
_________________
VO-BB Member #31 Enlisted June, 2005

I'm not a Zoo, but over the years I've played one on radio/TV. .
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Jason Huggins
The Gates of Troy


Joined: 12 Aug 2011
Posts: 1846
Location: In the souls of a million jeans

PostPosted: Fri Apr 15, 2016 12:10 pm    Post subject: Reply with quote

As a side note from my earlier post, all descriptions of wood qualities are based on them being a quarter inch thick and able to vibrate freely. Get any of those woods in lumber form and I highly doubt they would impart anything other than varying levels of delightful aroma. Man I LOOOOVE the smell of Cocobolo. I used to have a magical guitar (2008 Taylor Fall Limited GA Cocobolo) and every time I put it down after playing I would stick my nose down in the soundhole and breath deeply. Maybe I'll get some Cocobolo and make some raw trim around my bass traps out of it. I would never want to leave my booth Smile
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Jason Huggins
The Gates of Troy


Joined: 12 Aug 2011
Posts: 1846
Location: In the souls of a million jeans

PostPosted: Fri Apr 15, 2016 12:13 pm    Post subject: Reply with quote

Monk wrote:
Jason,

Ya made my morning..


And THAT makes my day! Smile
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    VO-BB - 19 YEARS OLD! Forum Index -> Gear ! All times are GMT - 7 Hours
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group