View previous topic :: View next topic |
Author |
Message |
Jason Huggins The Gates of Troy

Joined: 12 Aug 2011 Posts: 1846 Location: In the souls of a million jeans
|
Posted: Tue May 14, 2013 3:12 pm Post subject: |
|
|
Just for fun I did a quick recording of my furnace (literally 3 feet from the door of my studio) running with the door open and the door shut.
http://therealcoolguy.com/audio/quicksoundtest.mp3
The only thing you can hear is the computer noise (I have my iMac in the studio for now). The last recording is with the furnace off so you can hear that there is practically no difference in the room when the door is shut. |
|
Back to top |
|
 |
georgethetech The Gates of Troy

Joined: 18 Mar 2007 Posts: 1878 Location: Topanga, CA
|
Posted: Tue May 14, 2013 3:34 pm Post subject: |
|
|
Green Glue rocks, have used it on every build in the last 5 years. With that small a space to work with, in the end a used WhisperRoom will be FAR less hassle, faster to assemble (1 day vs several weekends), about the same $ or cheaper, has ventilation, and has a resale value. It will NOT stop low frequency rumble, but mid-high range air wooshing from fans no problem.
What's your time worth? _________________ If it sounds good, it is good.
George Whittam
GeorgeThe.Tech
424-226-8528
VOBS.TV Co-host
TheProAudioSuite.com Co-host
TriBooth.com Co-founder |
|
Back to top |
|
 |
Scott Lyle Contributor IV

Joined: 27 Jul 2010 Posts: 109 Location: Greensboro, NC, home of the ACC
|
Posted: Tue May 14, 2013 6:40 pm Post subject: |
|
|
that's a good point, george. building projects can often take on a life of their own, especially when you can't go pick something up easily at the home center.
you mentioned finding too much information with a web search: back when monk built his studio last year he referenced the book Home Recording Studio Build it Like the Pros by Rod Gervais. I've yet to get it myself (big help i am-can't even review it ) , but maybe that could be a starting point for you if you're set on building. i also saw monk used SilentCaulk at the joints for the floor and ceiling.
by resilient channel, are you refering to steel studs or something like hat channel? would steel studs be better to build with than wood since you can tuck the insulation inside them? would that help to reduce sound transmission?
i'm no sound guy, but if you have a question about the carpentry aspect of it I would be glad to try and help. _________________ “Real freedom is freedom from the opinions of others. Above all, freedom from your opinions about yourself. ”
― Brennan Manning, |
|
Back to top |
|
 |
Jason Huggins The Gates of Troy

Joined: 12 Aug 2011 Posts: 1846 Location: In the souls of a million jeans
|
Posted: Tue May 14, 2013 8:48 pm Post subject: |
|
|
Wood and steel studs supposedly make no difference if the walls are decoupled. Resilient channel is similar to hat channel but it was originally made to decouple the walls. It doesn't have the solid walls that the hat channel does, but is installed the same way. Resilient channel has kind of become synonymous with hat channel though, depending on who you talk to, and there isn't get lab data on a lot of the versions of resilient channel.
From what I've read, typical insulation won't be soundproofing much at all. The sound transfers through the solid parts, not the air. The only way to stop sound is mass and space. This is why decoupling the walls is essential for stopping sound.
Clips show a good reduction in sound transference, but they are expensive. Double layer 5/8" with green glue and whisperclips (or the like) would work well...but thickness is gonna be a problem still. |
|
Back to top |
|
 |
vkuehn DC

Joined: 24 Apr 2013 Posts: 688 Location: Vernon now calls Wisconsin home
|
Posted: Tue May 14, 2013 9:16 pm Post subject: |
|
|
swdstmkr wrote: |
would steel studs be better to build with than wood since you can tuck the insulation inside them? would that help to reduce sound transmission?
|
No, you want the mass and rigidty of the wood. Steel can resonate with some frequencies... but that is more likely to be a problem in a music studio than a voice studio.
The insulation inside the wall does virtually nothing to stop sound transmission. 30 years ago I bought one of the new generation Energy-efficient homes. 6 inches walls with insulation... which did stop heat transfer. The real estate sales rep said: All you have to do is light up a cigar once a day and the heat of that one match will keep your home warm. Silly, yes, but slightly truthful. BUT. my retired neighbor would sit on his side yard patio at night after I had gone to bed. He would smoke a cigar. I could hear him strike the match when he lit the cigar. Insulation DOES LITTLE to stop sound. (I've sometimes wondered what he heard from OUR side of the wall late at night. ) |
|
Back to top |
|
 |
Lee Gordon A Zillion

Joined: 25 Jul 2008 Posts: 6864 Location: West Hartford, CT
|
Posted: Wed May 15, 2013 1:13 am Post subject: |
|
|
soundgun wrote: | a used WhisperRoom will be FAR less hassle, faster to assemble (1 day vs several weekends), about the same $ or cheaper, has ventilation, and has a resale value. |
You are probably right. But in order to buy one, there has to be one for sale. I have only looked on Craigslist and other than the $500 one I missed out on and a huge one that a local studio was unloading for around 7 grand, there haven't been any others listed. I'm not sure what other resources there might be to find one. _________________ Lee Gordon, O.A.V.
Voice President of the United States
www.leegordonproductions.com
Twitter: @LeeGordonVoice
 |
|
Back to top |
|
 |
ballenberg Lucky 700
Joined: 10 Nov 2004 Posts: 793 Location: United States
|
Posted: Wed May 15, 2013 3:06 am Post subject: |
|
|
Quote: | I could hear him strike the match when he lit the cigar |
I'm guessing your bedroom had a window--probably not the wall insulation that was the culprit. |
|
Back to top |
|
 |
NeilTheVoice

Joined: 14 May 2013 Posts: 3 Location: London
|
Posted: Wed May 15, 2013 3:52 am Post subject: |
|
|
On Jasons point about being near a furnace and water heater, my set up is the same, only problem I have is the studio gets VERY hot, its just me and the mic in there but still super hot! Dont get any leak of sound into the booth, found that sealing up all joints with bathroom sealant did the job - sounds crazy, but does a fantastic job. _________________ I'm in a room, talking to myself, promise I'm not mad....just doing another voiceover.
http://www.neilwilliamsvoiceover.com |
|
Back to top |
|
 |
Monk King's Row

Joined: 16 Dec 2008 Posts: 1152 Location: Nestled in the Taconic Hills
|
Posted: Thu May 16, 2013 3:53 pm Post subject: |
|
|
Having built my own space, I can tell you, a construction project takes time. I had a spare room so that was easy.
A whisper room or small booth works for some people, I stepped into Amy's booth and couldn't believe how boomy it was for my voice. For hers it's like butter.
I prefer to have a room with air and volume, 1500 cubic feet is a good starting place.
In my build I used GreenGlue and love it. Can't hear the neighbors at all. I can still hear the train on a cold clear night when it's booming up the hill a mile away.. but it passes in less than a minute.
It's faint, but it's low frequency and it carries through the valley.
The booth I use at work is a Wenger, it's 4' by 6' and we treated the walls just to tone it down some more. But even then, if there's running in the hallways... you hear it. boom boom boom..
Mass and air... mass and air... _________________ Company, villainous company, hath been the spoil of me...
www.monksvoice.com |
|
Back to top |
|
 |
heyguido MMD

Joined: 31 Aug 2011 Posts: 2507 Location: RDU, the Geek Capitol of the South
|
Posted: Thu May 16, 2013 11:18 pm Post subject: |
|
|
Spring arrived last week....
And with it.... The birds.
My window plug? Suddenly useless.
A half dozen moving blankets later?
Working again.
Birdseed? Cheep.
Ingenuity? Priceless.  _________________ Don Brookshire
"Wait.... They wanna PAY me for this?" |
|
Back to top |
|
 |
Lee Gordon A Zillion

Joined: 25 Jul 2008 Posts: 6864 Location: West Hartford, CT
|
Posted: Fri May 17, 2013 12:19 am Post subject: |
|
|
A couple of weeks ago I stocked up on moving blankets when Harbor Freight had them for 6 bucks apiece. _________________ Lee Gordon, O.A.V.
Voice President of the United States
www.leegordonproductions.com
Twitter: @LeeGordonVoice
 |
|
Back to top |
|
 |
Donna King's Row

Joined: 08 Feb 2008 Posts: 1118 Location: The studio or the barn.
|
Posted: Fri May 17, 2013 6:13 am Post subject: |
|
|
Lee, I'm so with you on TMI paralysis. Still haven't built/bought a booth. My house is for sale at the moment, so that has kind of taken focus a little, but that's another story.
Has anyone heard of Sonic Technology booths?
http://www.sonicsoundrooms.com/index.html _________________ Dangerous.
Donna Postel
donnapostel.com
donna@donnapostel.com |
|
Back to top |
|
 |
Lee Gordon A Zillion

Joined: 25 Jul 2008 Posts: 6864 Location: West Hartford, CT
|
Posted: Fri May 17, 2013 8:46 am Post subject: |
|
|
That looks pretty interesting. But, if I haven't mentioned it before, I'm a bit of a cheapskate and I am fairly convinced I can build a functional booth for considerably less than four grand. _________________ Lee Gordon, O.A.V.
Voice President of the United States
www.leegordonproductions.com
Twitter: @LeeGordonVoice
 |
|
Back to top |
|
 |
georgethetech The Gates of Troy

Joined: 18 Mar 2007 Posts: 1878 Location: Topanga, CA
|
Posted: Sat May 18, 2013 1:38 am Post subject: |
|
|
thanks for creating my topic for this Sunday's east-west audio body shop, guys. _________________ If it sounds good, it is good.
George Whittam
GeorgeThe.Tech
424-226-8528
VOBS.TV Co-host
TheProAudioSuite.com Co-host
TriBooth.com Co-founder |
|
Back to top |
|
 |
Lee Gordon A Zillion

Joined: 25 Jul 2008 Posts: 6864 Location: West Hartford, CT
|
Posted: Sat May 18, 2013 9:24 am Post subject: |
|
|
I guess I'd better tune in. _________________ Lee Gordon, O.A.V.
Voice President of the United States
www.leegordonproductions.com
Twitter: @LeeGordonVoice
 |
|
Back to top |
|
 |
|